Engine

Timing locking tool set VAG 1.6 / 2.0 TDi

Intended for installation and adjustment of the gas distribution mechanism phases of diesel engine..

57.66€

57.66€

Timing locking tool set VAG 2.5 / 4.9 TDi

Used to install the gas distribution mechanism phases for diesel engines 2.5 and 4.9 TDi PD VAG. ..

230.25€

230.25€

Timing locking tool set VAG 2.7 / 3.0 TDi V6

Intended for installation and adjustment of the gas distribution mechanism phases of diesel engine..

75.63€

75.63€

Timing tool kit Ford 2.0 Ecoblue TDCi

Designed for setting and adjusting the valve timing of diesel engines in Ford commercial vehicles..

85.39€

85.39€

Torx® deep socket 1/2"

Working profile - internal Torx®. Made by the method of cold stamping. Material - chrome-vanadiu..

1.96€

1.96€

Torx® deep socket 1/2"

Working profile - internal Torx®. Made by the method of cold stamping. Material - chrome-vanadiu..

0.00€

from 2.49€ to 4.05€

Torx® insert bit set with hole

The inserts are cold stamped from chrome-vanadium tool steel, hardened to a hardness of 55-60 HRC ..

0.00€

7.55€

Torx® insert bit set with hole

Inserts are made by the cold stamping method of the S2 tool steel, hardened to 55-60 HRC and prote..

0.00€

2.89€

Torx® socket 1/2"

Has a working profile Torx®. Made by the method of cold stamping. Material - chrome-vanadium too..

0.77€

from 0.77€ to 1.69€

Torx® socket set 1/2"

Set is equipped with a steel rail with lug socket holders. Comes stored and orginized in a indivi..

9.81€ Ex Tax: 8.11€

Torx® socket set 1/2"

Set is equipped with a steel rail with lug socket holders. Comes stored and orginized in a indivi..

12.80€ Ex Tax: 10.58€

Torx® socket set 1/2"

Individual packaging - a metal case. ..

14.00€ Ex Tax: 11.57€

Torx® socket set 1/4" 1/2"

Set is equipped with a steel rail with lug socket holders. Comes stored and orginized in a indivi..

6.69€ Ex Tax: 5.53€

Torx® socket set 1/4" 1/2"

Set is equipped with a steel rail with lug socket holders. Comes stored and orginized in a indivi..

7.84€ Ex Tax: 6.48€

Torx®, Spline and Hex insert bit set

The inserts are cold stamped from chrome-vanadium tool steel, hardened to a hardness of 55-60 HRC ..

0.00€

18.40€

Torx®, Spline and Hex insert bit set

Inserts are made by the cold stamping method of the S2 tool steel, hardened to 55-60 HRC and prote..

57.67€

57.67€

Trucks fuel injector puller

Intended for dismantling and installation of fuel injectors of diesel engines. Used for repair of..

16.50€

16.50€

Tube spark plug socket wrench

Made by cold stamping method from steel pipe with wall thickness 2 mm. Has a hole for the tap wre..

0.00€

from 1.23€ to 1.27€

Twin cam locking tool

Intended for locking the camshafts during engines tuning and replacement of a belt of a drive of g..

27.71€

27.71€